Introduction

Heavy equipment is essential for all types of construction, excavation, and infrastructure work. Heavy equipment such as excavators and loaders can save tons of effort. However, this only works if the site is prepared properly. For more information click on https://newtown.com.sg/. This article provides a general overview of the checklist to prepare the site before delivering heavy equipment.

Things to consider before bringing heavy equipment on site

There are certain preparations to be made on site before bringing any heavy equipment onto it. These factors are:

Assessing Site Access

An individual should make sure that the equipment can be delivered and a backup can be used. Access roads should be adequately wide to allow large trucks and trailers to deliver equipment. You should also inspect the site for low-hanging power lines, tree branches, and narrow entryways to clear access codes to the work zone.

Clearing the Work Area

Before your equipment arrives, the work area should be cleared of anything unnecessary, debris, structures, or materials that would impede movement. The ground should be as level as possible because uneven, loose, or unstable terrain can make heavy-duty machine stability uncertain.

Identify Hazards Underground and Overhead

It is important to identify the hazards beneath and above the surface. Before performing any excavation, it is imperative to know exactly where the underground utilities (gas, water, electric) are and to mark them if necessary to avoid damaging them during the work. 

Equipment Storage and Maintenance Area

In many cases, construction sites will keep large machinery on site for an extended time. An initial step will be to determine appropriate locations and designated areas for the storage of machinery. These areas will allow for relative maintenance, without interfering with other aspects of the construction site.

Assess the Soil Load Capacity

The ground needs to support the weight of the large, heavy machinery without shifting or collapsing. Areas that tend to be prone to saturation from water and/or erosion should be handled in advance, as unstable ground may cause the machinery to tip over or sink.

Conclusion

Adequate site preparation is the basis of safe and productive heavy equipment operation. Every step is critical to preventing accidents and unnecessary delays, whether it’s checking access routes, assuring ground stability, planning safe zones, or avoiding exposure to hazards; all of these are vital to a project taken on with heavy equipment. Sites that are prepared well reduce injury to all workers, protect machinery, and ultimately raise production levels and productivity, helping build a project on time.